How to reset the Anti-Flood Device on your Electrolux Dishwasher

Have you ever had that heart-sinking feeling when an appliance makes a noise you’ve never heard before? An alarm sounds and all you can think of is how much it’s going to cost you to call an engineer out to fix it. This happened to me a couple of evenings ago. I have an Electrolux integrated dishwasher, model ESL 4200LO. It’s only just out of warranty, typical!

I checked the machine out and found that the empty pump was running constantly, even when I opened the door, usually everything stops at this point, but it didn’t. The alarm was beeping 3 times intermittently along with a flashing “end of cycle” LED. The only way I could get everything to stop was to turn off the power, not the ideal situation.

I checked the manual to see what the alarm meant and it turns out that the Anti-Flood device had been activated. This activates if the machine detects a leak, handy to know that your kitchen won’t be flooded if something goes wrong. Continue reading “How to reset the Anti-Flood Device on your Electrolux Dishwasher”

Single tap enable GPS using Tasker (Without Root)

I like use the Waze navigation app when I drive. Not only for navigation but also for its speed camera detection, speed limits and of course as any Waze user will know, the points. For this to work well it needs GPS enabled.

In the past I have tried to automate GPS using Tasker profiles like “When I connect to a certain Bluetooth device” or “When a Bluetooth device has connected and the device has been unlocked” but I found they were unreliable. I also tried out automating GPS when Waze launched, but with this profile I also found the exit task to be unreliable and with Waze having to be on the home screen (to avoid multiple taps) I thought it was messy – terrible I know!

So, in this post I’ll show you how I have automated GPS with minimal taps and keeping everything tidy by using a Tasker shortcut. Continue reading “Single tap enable GPS using Tasker (Without Root)”